phone
+7 (977) 791-19-39 +7 (925) 654-00-75
phone WhatsApp
Semi-dry floor screed in Bratsk | from 390 ₽/m²
Semi-dry floor screed in Bratsk is a strong and economical method of laying, providing fast drying, no shrinkage and durability for any floor coverings.

Semi-dry floor screed in Bratsk

from
390
₽
phone WhatsApp phone WhatsApp
semi-dry floor screed in Bratsk
semi-dry floor screed in Bratsk
semi-dry floor screed in Bratsk
Semi-dry screed flooring in Bratsk is an innovative method of flooring installation that has gained wide popularity due to its efficiency, reliability and cost-effectiveness. This method is used in both residential and commercial applications, offering many advantages over traditional screeding methods. In this article, we will look at all aspects of semi-dry screeding, including installation techniques, advantages, disadvantages, materials and tools, and answers to the most frequently asked questions.

What is semi-dry floor screed in Bratsk?

Semi-dry floor screed in Bratsk is a mixture of cement, sand and a small amount of water. Unlike classic screed, which requires a significant amount of water to dissolve the components, semi-dry screed uses a minimal amount of water. This allows to speed up the drying process and increase the durability of the coating.
semi-dry floor screed in Bratsk
semi-dry floor screed in Bratsk
semi-dry floor screed in Bratsk
semi-dry floor screed in Bratsk
Technology of laying semi-dry floor screed in Bratsk
  1. Preparation of the base: Begins with a thorough preparation of the substrate. All dirt, dust and old coatings are removed. The surface is leveled and, if necessary, treated with a primer to improve the adhesion of the screed to the base.
  2. Waterproofing installation: A layer of waterproofing is applied to the prepared substrate. This prevents the penetration of moisture from the lower layers into the screed, which is especially important in rooms with high humidity levels.
  3. Installing beacons: Beacons are used to ensure a smooth surface of the screed. They are installed on the same level using a laser level or construction level. The distance between lighthouses is usually about 1-2 meters.
  4. Preparation of the mixture: The dry components-cement and sand-are thoroughly mixed. Then a small amount of water is added to make the mixture the consistency of wet sand. The ratio of cement to sand is usually 1: 3 or 1: 4, depending on the required screed strength.
  5. Laying the mix: The finished mixture is laid out on the surface between the lighthouses and leveled with a rule. The laying process should be fast and continuous to avoid stratification of the mixture.
  6. Compaction and alignment: After laying, the mix is compacted using a vibrating plate or other tool to remove air bubbles and achieve high screed density. The surface is leveled with a rule and smoothed with special ironers.
  7. Screed maintenance: During the first few days, it is necessary to maintain optimal screed humidity to prevent cracking. To do this, the surface can be covered with plastic wrap or regularly moistened with water.

Advantages of semi-dry floor screed in Bratsk

  1. Fast drying: Semi-dry screed dries much faster than traditional methods, which reduces the construction time.
  2. High strength: Thanks to the minimal amount of water and careful compaction, the semi-dry screed is highly durable and resistant to mechanical stress.
  3. No shrinkage: The low water content prevents shrinkage of the screed, which minimizes the risk of cracks and deformations.
  4. Cost-effectiveness: Semi-dry screed requires less materials and installation time, which makes it a more economical option compared to traditional methods.
  5. Versatility: The method is suitable for all types of premises, including residential, commercial and industrial facilities.
semi-dry floor screed
semi-dry floor screed
semi-dry floor screed
semi-dry floor screed

Disadvantages of semi-dry floor screed in Bratsk

  1. Need for special equipment: For the preparation and installation of semi-dry screed, special equipment is required, such as concrete mixers, vibrating plates and laser levellers.
  2. Demanding skills of workers: High-quality work requires experienced and qualified specialists, which can increase the cost of services.
  3. Layer thickness restrictions: Semi-dry screed recommended for layers with a thickness of 30 to 80 mm. If thicker layers are required, additional reinforcement may be required.

Materials and tools for semi-dry floor screed in Bratsk

  1. Cement: The main component of the screed. It is recommended to use M400 or M500 grade cement to ensure the required strength of the coating.
  2. Sand: It is preferable to use medium-sized river sand, thoroughly cleaned of impurities and organic substances.
  3. Water: Used in minimal quantities. It is important to use clean water without impurities.
  4. Plasticizers: Additives that improve the properties of the mixture, making it more plastic and easy to install.
  5. Reinforcing materials: Mesh or fibreglass to increase the strength of the screed and prevent cracking.
  6. Concrete Mixers: Equipment for preparing the mixture. Both mobile and stationary options are available.
  7. Vibrating Plates: A tool for compacting the mixture and removing air bubbles.
  8. Laser levels: Instruments for precise installation of lighthouses and surface level monitoring.
  9. Rules and gladilki: Tools for leveling and smoothing the screed surface.
semi-dry floor screed
semi-dry floor screed
semi-dry floor screed
semi-dry floor screed

Environmental friendliness and safety

Semi-dry floor screed in Bratsk is characterised by high environmental friendliness. The materials used, such as cement and sand, do not contain harmful chemical additives, which makes them safe for human health. In addition, the minimum amount of water in the mixture prevents the formation of mould and fungus, which is especially important for residential premises. An important aspect is also the absence of dust and dirt during laying, which makes the process less harmful to the environment and the health of workers.

Application in various types of premises

Semi-dry floor screed in Bratsk is universal and suitable for use in a wide variety of premises. In residential houses and flats, it creates a perfectly flat base for laying tiles, laminate or parquet. In commercial and office buildings, semi-dry screed provides durability and resistance to high loads. In production facilities and warehouses, this screed withstands significant mechanical impact, which makes it indispensable under heavy operating loads.
semi-dry floor screed
semi-dry floor screed
semi-dry floor screed
semi-dry floor screed

Comparison with traditional screed

Compared to traditional screed, semi-dry screed has many advantages. It dries much faster, which reduces the time required for construction and repair work. This is especially important if there is a limited time frame or if you need to quickly fill in the premises. In addition, semi-dry screed has better adhesion to various types of floor coverings, which ensures durability and reliability of the final result. Its strength and crack resistance exceed the performance of traditional screed.

Conclusion

Semi-dry floor screed in Bratsk is a modern and effective method of creating a reliable and durable base for any floor covering. The advantages of this method, such as fast drying, high durability and cost-effectiveness, make it an excellent choice for construction and repair. However, to achieve the best results, it is important to follow all technological requirements and use quality materials and tools.
semi-dry floor screed
semi-dry floor screed

How we work

Free consultation and measurement.

Free consultation and measurement
Our specialists go to the site, inspect the premises and make all the necessary measurements. After that, they give professional advice and make accurate estimates for the work.

Preparation of the foundation.

installing the damping tape
We carefully prepare the surface, leveling the floor, removing old floor coverings and installing a damping tape around the perimeter of the room.

Setting up beacons.

Setting up beacons
To ensure the perfect flatness of the floor over the entire area, special beacons are installed - guides for the final alignment of the screed.

Laying a semi-dry mixture.

Laying a semi-dry mixture
Then our professional teams start laying high-quality semi-dry mix over the entire area using specialized equipment.

Finishing leveling and sanding.

Finishing leveling and sanding
After the mixture has cured to the desired state, a final alignment is performed using beacons, and then the surface is sanded for perfect smoothness.

Quality control and guarantee.

work quality control
At the final stage, a thorough quality control of the work is carried out. The result of our services is supported by a guarantee in accordance with the established requirements.

Understanding and advantages of semi-dry floor screed in Bratsk

Floor screed is an important stage in the construction process, ensuring the evenness and smoothness of the floor surface. Semi-dry floor screed in Bratsk is a popular method that combines the advantages of both wet and dry screed. In this article, we will look at the essence of semi-dry floor screed, its advantages and factors that should be considered in its successful implementation.

Understanding semi-dry screed flooring in Bratsk

The main stages of laying semi-dry floor screed

Semi-dry floor screed in Bratsk is a method that combines the advantages of both wet and dry screed. It involves applying a layer of cement-sand screed that is not completely wet when applied. This allows for faster drying time compared to wet screeding, while still providing a high quality finish. Semi-dry screed material is usually applied to the prepared surface using a pump mortar, which provides an even and controlled layer.

Advantages of semi-dry floor screed in Bratsk

Advantages of semi-dry floor screed

  1. Fast drying time: A semi-dry screed floor in Bratsk dries faster than a wet screed, allowing for faster installation of flooring such as tiles, carpets or wood flooring. This can significantly reduce downtime and overall construction time.
  2. Cost-effective: Semi-dry floor screed in Bratsk is generally more cost-effective than wet screed as it involves less labour and material costs due to faster drying times. However, it is important to note that the overall cost may vary depending on the specific requirements and conditions of the project.
  3. High quality finish: Despite faster drying times, semi-dry screed flooring in Bratsk can still provide a high quality finish. The use of cement-sand materials provides a strong and durable base for the flooring, while the controlled application of the layer ensures an even surface.

Factors to consider when semi-dry screeding a floor in Bratsk

Recommendations for choosing materials for semi-dry floor screed

  1. Preparation: Proper surface preparation is the key to the success of semi-dry screeding in Bratsk. The surface must be clean, level and structurally sound. Any defects or irregularities in the surface can lead to uneven drying, cracks or other problems with the screeded surface.
  2. Climatic conditions: Semi-dry screed flooring in Bratsk is sensitive to climatic conditions, especially temperature and humidity. Extreme heat or cold can affect the drying process, which can lead to cracks or other problems. It is important to plan screeding works accordingly and take into account local climatic conditions.
  3. Proper equipment: Using the correct equipment is essential for a successful semi-dry screed floor in Bratsk. A mortar pump is usually used to apply the material and it is important that it is correctly set and maintained to ensure an even and controlled layer.

Conclusion

Semi-dry floor screed in Bratsk is an effective and widely used method that combines the advantages of both wet and dry screed. Its fast drying time, cost benefits and high quality finish make it a popular choice for many construction projects. However, successful implementation of semi-dry screed flooring requires proper surface preparation, consideration of climatic conditions and use of the correct equipment.

semi-dry floor screed

Sovetskaya street, 7s1 +7 (925) 654-00-75 Bratsk 665729

angle down angle down angle down angle down angle down
9 May
Semi-dry floor screed was recommended to me by friends, and I did not regret that I listened. The work took only a few days, and the result was perfect. The floor is smooth, without cracks or shrinkage. It was especially pleasant that there was almost no dirt and debris at work. A week later, I was able to start laying laminate flooring. The technology met all expectations. The quality of the screed is at the highest level, very satisfied.

angle down angle down angle down angle down angle down
9 May
For a long time we could not decide which screed technology to choose, but a semi-dry screed was the best solution. The work was done quickly and cleanly, which was important for us, since the repairs were carried out in a residential area. The floor was smooth and solid, with no visible defects. Laying of tiles began in a few days. This is a great option for those who want to quickly and efficiently complete repairs.

angle down angle down angle down angle down angle down
18 May
We were doing repairs in the house, and decided to choose a semi-dry floor screed. This turned out to be a great solution! The workers performed their work professionally: everything was done efficiently, without delays and unnecessary dust. The floor dried quickly, and we were able to continue working. I especially liked that the screed was very strong and smooth, without cracks. I highly recommend this technology to anyone who wants to get a high-quality floor without unnecessary hassle.

angle down angle down angle down angle down angle down
16 January
Semi-dry screed is an excellent solution for those who value time and quality. The work was completed quickly, without unnecessary garbage. The floor turned out to be smooth and in a few days it was possible to start further finishing. No cracks or defects appeared, which is very important for laying laminate flooring. I am happy with the choice, now I will advise a semi-dry screed to all my friends.

angle down angle down angle down angle down angle down
21 November
For repairs in the apartment, we chose a semi-dry floor screed, and the result fully met expectations. The work was carried out without any problems: quickly, accurately and cleanly. The floor turned out to be perfectly flat, after a few days it was already possible to lay tiles. The quality of the screed is excellent – no cracks, no shrinkage. We are very happy that we chose this technology, because it saved us time and nerves.

angle down angle down angle down angle down angle down
21 October
Semi-dry floor screed is just a godsend! The workers did everything quickly and without unnecessary dust, which was especially pleasing. The floor turned out to be smooth and strong, and in a few days it was already possible to start further laying the coating. It is especially pleasant that no defects or cracks appeared even after a few months. We are very satisfied with the quality of our work and recommend it to everyone.

angle down angle down angle down angle down angle down
15 August
When the house was being renovated, we decided on a semi-dry floor screed, and this turned out to be an ideal option. The work was carried out quickly, without excessive noise and dust. The floor turned out to be smooth and ready for further work in a week. It is especially important that there were no cracks or other defects. We are happy with the result and will recommend this technology to all our friends.

angle down angle down angle down angle down angle down
11 July
For a long time we thought about which screed to choose, but the semi-dry technology was the ideal solution for us. The work was carried out quickly and without unnecessary debris, the floor turned out to be smooth and after a week we were able to continue laying tiles. The quality of the screed pleased – no cracks, no defects. Semi-dry floor screed is a really reliable solution for those who want to get a high-quality floor.

angle down angle down angle down angle down angle down
7 March
Recently, we made a semi-dry floor screed in a new apartment, and were very satisfied with the result. The floor turned out to be smooth, solid and ready for further work in a few days. I was especially pleased that the workers did everything clean and neat, leaving no dirt behind. This is a great solution for those who want to get a quality floor in a short time.

angle down angle down angle down angle down angle down
18 March
Semi-dry floor screed proved to be an ideal option for our renovation. The work was carried out quickly and without unnecessary dirt, which was very important, since the repair was carried out in a residential area. The floor dried quickly, and within a week we were able to continue laying laminate flooring. The screed turned out to be smooth and strong, not a single defect. We are very happy with the result and will recommend this method to everyone we know.

angle down angle down angle down angle down angle down
25 November
For a long time we chose between different methods of floor screed, but the semi-dry technology became the best solution for us. The work was done quickly and cleanly, the floor was smooth, and in a few days it was already possible to start laying tiles. The quality of the screed is excellent – no cracks, no defects. We are very happy with the result and will recommend a semi-dry screed to everyone.

angle down angle down angle down angle down angle down
23 March
Semi-dry floor screed is a real godsend for those who want to get a high-quality floor in a short time. The workers did everything professionally: quickly and cleanly. The floor dried out after a few days, and we were able to continue the repairs. Especially nice that no cracks or shrinkage appeared. We are very happy with the choice of this technology.

angle down angle down angle down angle down angle down
9 January
For repairs in the new building, we chose a semi-dry floor screed, and this turned out to be the ideal solution. The work was carried out quickly, the floor turned out to be smooth and strong, no defects appeared. After a few days, we were able to continue laying the floor covering. Semi-dry floor screed technology really saves time and provides excellent results.

angle down angle down angle down angle down angle down
12 April
Semi-dry floor screed is the best choice for those who want to get a smooth and solid floor without unnecessary hassle. The work was done quickly, without dust and dirt. The floor dried up after a few days, and we were able to continue laying the coating. I really liked the quality of the screed – no cracks, no shrinkage. I will recommend a semi-dry screed to all my friends.

angle down angle down angle down angle down angle down
18 June
Semi-dry floor screed was done in a private house, and the result exceeded expectations. The work was carried out quickly and cleanly, the floor turned out to be smooth, without cracks or other defects. A few days later, we started laying the laminate flooring. We are very satisfied with the quality of the screed and the fact that we chose this particular technology. I recommend it to everyone!

angle down angle down angle down angle down angle down
12 February
We did a semi-dry floor screed in a new apartment, and we were very satisfied with the result. The work was carried out quickly, without unnecessary dirt and dust. The floor turned out to be smooth and strong, ready for laying tiles in a week. It is especially important that the screed does not shrink or crack. We are very happy with the result and will recommend this technology to others.

angle down angle down angle down angle down angle down
5 February
Semi-dry floor screed is an ideal solution for those who want to complete repairs quickly and efficiently. The work was carried out quickly and without unnecessary dust, which is especially pleasant. The floor dried up after a few days, and we were able to continue laying the floor covering. The quality of the screed is excellent – not a single defect. I recommend this technology to everyone!

angle down angle down angle down angle down angle down
12 March
We decided to choose a semi-dry floor screed for repairs in the apartment, and it turned out to be an excellent solution. The work was carried out quickly and accurately, without unnecessary dust and debris. The floor turned out to be smooth, strong, and after a week we started laying tiles. We are very satisfied with the result and quality of the screed – no cracks or defects. We recommend this method of floor screed to everyone!

FAQ

Frequently Asked questions and answers.

The installation time depends on the area of the room and the skills of the workers. On average, a team of three people can lay a screed on an area of up to 100 m2 in one working day.
You can walk on the screed as early as 12-24 hours after laying, but it is recommended to refrain from significant loads during the first 7 days.
Complete drying of the screed takes about 28 days. After that, you can start laying the final coating, such as tiles, laminate or parquet.
Semi-dry screed is mainly used indoors. For outdoor work, it is better to use special compositions that are resistant to atmospheric factors.
To prevent cracks, it is important to follow the installation technology, use high-quality materials and maintain optimal screed humidity in the first days after installation.
Semi-dry floor screed in Bratsk is usually performed indoors, as the installation process requires control over environmental conditions, such as temperature and humidity. These indoor parameters are easier to control and maintain at an optimal level. However, in some cases, semi-dry screed can be used in open areas, if certain conditions are provided. For example, if it is necessary to create a temporary cover on a construction site or in favorable weather conditions. When performing a semi-dry screed on the street, the following points should be taken into account::
  1. Weather conditions: Avoid working in rain or strong winds, as this may affect the quality of the mixture and the drying process.
  2. Moisture protection: Provide protection from rain and other weather conditions to avoid getting the screed wet and losing its properties.
  3. Temperature conditions: Please note that the air temperature may affect the drying time of the mixture. Performing work in too low or high temperatures can lead to problems.
  4. Solidification: Make sure that the mixture has sufficient time to harden and acquire the necessary strength.
In any case, it is recommended to consult with professionals and follow the recommendations of manufacturers of specific materials and mixtures to ensure optimal conditions for semi-dry floor screed in open areas.
Temperature conditions are an important factor when performing semi-dry floor screed in Bratsk, as they can significantly affect the processes of solidification and drying of the mixture. General recommendations for temperature conditions may vary depending on the specific materials used in the mixture and the manufacturer's recommendations. However, usually:
  1. Minimum temperature: The minimum ambient temperature during and after laying a semi-dry screed should usually be above 5-10 degrees Celsius. Cool or cold weather can slow down the drying process, which can affect the quality of the screed.
  2. Maximum temperature: Avoid working at too high temperatures, as this may cause the mixture to dry too quickly, which in turn may cause problems with its processing and quality.
It is important to note that temperature recommendations may differ for different types of mixtures and brands of materials. Before starting work, you should always carefully read the manufacturer's recommendations and, if necessary, consult with construction professionals.
In the process of performing a semi-dry floor screed in Bratsk, it is usually not necessary to pour water after pouring. This screed method involves the use of special mixtures that interact with water to activate their properties. Interfering with this process, for example by watering, can disrupt the balance and properties of the mixture. However, you should carefully read the manufacturer's recommendations and instructions for the particular material or mixture you are going to use. In some cases, the manufacturer may offer specific instructions for care or activation of the mixture after pouring. It is always important to adhere to the manufacturer's recommendations to ensure optimal results and durability of the screed. If you have any doubts or questions, it is best to consult with the manufacturer's representative or another experienced specialist in the field of construction.
Yes, a semi-dry floor screed in Bratsk can be used in combination with a warm water floor system. However, there are several important points to consider:
  1. Minimum screed thickness: When using a underfloor heating system, it is important to take into account that semi-dry screed usually has a minimum thickness. Some underfloor heating systems require a certain thickness of screed to ensure efficient heat transfer. Before starting work, it is recommended to check the technical characteristics of the materials used and the underfloor heating system.
  2. Thermal conductivity of the material: Make sure that the material used in the semi-dry screed has good thermal conductivity. This is important for efficient heat distribution over the entire floor area.
  3. Compatible with underfloor heating system: Before laying the screed, check whether the selected mix is compatible with the underfloor heating system. Some materials may be temperature sensitive or may contain components that are incompatible with the heating system.
  4. Water temperature monitoring: It is important to monitor the water temperature in the underfloor heating system. High temperatures can affect the properties of the screed material used.
  5. Following the manufacturer's recommendations: It is always recommended to strictly follow the manufacturer's recommendations for both the screed material and the underfloor heating system.
Before starting work, it is best to consult a professional engineer or a specialist in heating and floor systems. This will help to avoid potential problems and ensure efficient operation of a warm water floor in combination with a semi-dry screed.
Covering a semi-dry floor screed in Bratsk with a film may be necessary, but it depends on the specific environmental conditions in which the work is performed and the requirements of the material used. Here are a few situations where covering a semi-dry screed with a film can be useful:
  1. Protection from precipitation: If the work is carried out in an open area or in conditions where rain, snow or other precipitation is possible, covering the floor screed with a film can prevent moisture from entering, which can affect the curing process and the quality of the screed.
  2. Humidity control: In the case of high humidity in the room, especially if the screed is performed in high humidity conditions, the use of a film can help to control the humidity and ensure that the mixture dries more evenly.
  3. Shrinkage reduction: In some cases, covering the screed with a film can help prevent the mixture from shrinking too quickly, which can lead to cracks.
However, it is important to note that not all types of semi-dry screeds and materials require shelter. Some mixtures may provide sufficient protection from external influences without additional shelter. Before making a decision about covering the screed, it is recommended to read the instructions and recommendations of the manufacturer of the specific material. In some cases, covering with a film may be part of the recommended methods of care and maintenance of optimal conditions for the screed.
qrcode
© 2024, «Screed Floor»
Call us! We will answer all your questions
We'll tell you the price. Sending the catalog
phone +7 (977) 791-19-39
Promo code -10% from the site
Until 27 October. proweb
phone WhatsApp